Control of work of technological equipment
.
"Silur Plast" Ltd. has a large number of devices that allow you to get information about the state of the equipment both in the well and externally. Such information helps to prevent excessive loading on drilling equipment, prevent its breakage and prolong its service life.
The list of equipment and its characteristics can be found below.
.
Sensors of mechanisms:
.
Sensor position tacho block
The sensor DOL is designed to measure the angular displacement of the drill winch shaft and, accordingly, the linear movement of the tramline block. Read more …
.
Weight sensor on the hook
The sensor is designed to measure the weight of the drilling tool and control the load on the bit while drilling wells with a vertical barrel, as well as the weight on the hook of the drilling unit under various technological operations. Read more . .
.
Sensor revolutions rotor
The sensor is designed to measure the frequency of the rotor drive transmission elements. The principle of operation is based on the operation of the primary sensor transducer when the metal object is approached to its surface . Read more ...
.
Rotor torque sensors
The sensors are designed to control the torque of the rotary table. Read more ...
- The torque sensor on the DMC-T rotor
- The moment sensor on the DMC-D rotor
- The torque sensor on the DMR-D rotor
- The moment sensor on the DME rotor
.
Moment sensor on the keys of the DMQ
The torque sensor on the DMS key is intended for measuring the moment on the mechanical key of the rotor of drilling rigs for the purpose of sealing the connection of the casing pipes and preventing their breakage. Read more ...
.
Rotary table wedge position sensor
Sensor DKR is designed to determine the position of the wedge rotor table. It is installed in the rupture of the pneumatic system of the drive of the rotor wedges with the help of a snap. More .. .
.
Sensors of drilling fluid parameters:
.
Drill pump travel sensor
The sensor is designed to determine the performance of drilling pumps. Read more ...
.
Sensor pressure drill bit solution
The pressure sensor is designed to measure the pressure of the drilling fluid in the injection line or in the casing of oil and gas wells. Read more ...
.
Integrated sensor of density and temperature of drilling mud
The KD-3 drilling fluid density and temperature sensor is designed for measuring the density and temperature of the drilling fluid in the receiving containers. Read more ...
.
Temperature sensor of the drilling mud DTR
The DTR sensor is designed for measuring the temperature of the drilling mud, both in open gutter systems and in closed ones. The key advantage of this type is the ability to extend the case. Read more ...
.
Flow sensors and level of drilling fluid
.
The sensor system is designed to determine the flow of drilling mud and other process fluids, to determine the flow rate, as well as the instantaneous flow of electrically conductive liquids in closed, open capacities or in pipes at the inlet to the well.
.
Drilling mud flow sensors. Read more ...
- Sensor of drilling mud flow rate DRU
- Flow Meter-counter ultrasonic URD-011 with patch sensors
- Sensor of flow rate of drilling mud induction-magnetic RIM-10
- Indicator of leakage of drilling fluid at the outlet
.
Level sensors for drilling mud. Read more ...
- Gauge level drilling mortar reed dormancy
- VEGASON ultrasonic level drill bit sensor
- MONOSCAN ultrasonic drill bit level sensor
- The VEGAPULS radar sensor is a level drill bit
.
Pump shaft spindle sensor
The sensor is used for measuring fluid flow, which is pumped by plunger or piston pumps of cementing and other mobile and stationary aggregates. More .. .
.
In the next section you can get acquainted with Geochemical equipment