System of data collection SGTU-13

.

is designed for analog-digital conversion of voltages and current, frequency and number of pulses in accordance with the direction of reading and transmitting information to a technological computer. .

The SGTO SG-13 has excellent features: five frequency measurement channels, five status determination channels, five power-on control lines with normally open "dry" contacts.

.

Technical characteristics of the data collection system of the UOS SGTU-13

Number of current / voltage measuring channels	21 with the possibility extension to 60
Measured voltage	+2.5 В, +1.25 В, +625 mV, +312 mV, +156 mV, +78 mV, +39 mV, +20 mV
Measured current, mA	0…20
Bit rate, bit	16
Overvoltage protection of inputs (U max = + 25B)	available
Protection against the change in the polarity of the input voltage	available
The number of channels of signal measurement from the two-phase sensor DOL	1
Input signal level from two-phase sensor DOL, mA	0…10
Speed of calculation of the channel of the two-phase sensor of the position of the tall block, imp / s, not less	5000
Duration of the pulse of the calculation (phase), μs, not less	60
Number of frequency lines	5
Frequency measurement range, Hz	0,2…200
Measurement range of the output signal of the measurement lines	0 ... 20 mA, 0 ... + 5 V
Number of status determination channels	5
Level of input signals for channels of determination of the state, mA	0…10
Number of control lines "dry contacts"	5
Galvanic isolation of interface signals (U tests 500 V)	available
Interface for interaction	RS-422/485
Information transfer rate, b / c	57600
Output voltage for sensors, V	± 5, ± 12, 24
Maximum current on the line + 24V, A	4
Supply voltage of the collection system, V	230
Operating temperature range, ° С	+10…+50
Overall dimensions (length, height, width), mm	482 x 177 x 410
Weight kg	10

.

Next section: Electronic signal conditioning unit